The LX/SX/CS interfaces require "blue" adapter for the access to the middle-speed CAN bus.
Note: Alfa Romeo Giulia/Stelvio, Fiat 500E(2020+)/500X/Argo/Chronos/Toro, Jeep Renegade/Compass (MP), and RAM Pro Master (2022+) require the "grey" adapter (see below) for the access to the second high-speed CAN bus. As the OBDLink interfaces have high communication speed they are especially recommended for the Body computer configuration adjustment and odometer correction on Chrysler/Dodge/Ram/Jeep vehicles. No additional adapters are needed on these cars when using OBDLink EX or MX+.
These are most of the PowerNet and CUSW-based Chrysler/Dodge/Ram/Jeep vehicles starting from about 2012, and Fiat Tipo/Egea. The OBDLink MX+ Bluetooth or OBDLink EX USB are the recommended interfaces for the cars with high-speed CAN bus on pins 6 and 14 and the middle-speed CAN bus on the pins 3 and 11 of the car OBD socket. At present the following types of interfaces are supported: The software requires a compatible OBD interface. If in doubt please confirm the compatibility to you car with the bypass distributor / manufacturer. All FCA vehicles including Alfa Romeo and Fiat Platforms with the second High-Speed CANBUS ( Alfa Romeo Giulia/Stelvio, Fiat 500X/Toro/Jeep Renegade/Compass MP) Owners of Alfa Romeo Giulia/Stelvio, Fiat 500X/Toro/Jeep Renegade/Compass MP, make sure that the bypass supports the second high-speed CAN bus, the one that is connected to the pins 12 and 13 of the car OBD port.
Note: Starting from Model Year 2018 (Fiat 500L from MY2017) FCA installs the Security Gateway Module (SGW) which blocks third-party diagnostics. AlfaOBD has no software solution yet, as a workaround please use a hardware SGW bypass module.
electronic key and RF remote control programming.
Service light reset, engine oil change, DPF regeneration and many more. active diagnostics and configuration procedures for various equipment controlled by the ECUs.clearing fault codes, monitoring the system for the appearance of new faults.reading of static data: ECU id, system status, fault codes with probable causes and environment information where applicable.
and graphical presentation as adjustable plots
The AlfaOBD software is supported on the Windows PC and Android platforms. The native support differs AlfaOBD from the OBDII / EOBD diagnostic applications providing a limited access to the engine and transmission modules and sometimes to the ABS. Although the software is primarily targeted for car owners, it provides many of the features of the professional scanners.ĪlfaOBD natively supports the Electronic Control Units (ECU) installed on the FCA group vehicles. 1994-2021 Fiat / Alfa Romeo / Lancia cars, and 2005-2021 Chrysler / Dodge / Ram / Jeep cars are supported. Home | Supported Cars | Download & Purchase | DistributorsĪlfaOBD is a software for the diagnostics of the vehicles produced by Fiat Chrysler Automobiles (FCA) group.